For using the igraph C library
void igraph_version(const char **version_string, int *major, int *minor, int *subminor);
Arguments:

Pointer to a string pointer. If not null, it is set to the igraph version string, e.g. "0.9.11" or "0.10.0". This string must not be modified or deallocated. 

If not a null pointer, then it is set to the major igraph version. E.g. for version "0.9.11" this is 0. 

If not a null pointer, then it is set to the minor igraph version. E.g. for version "0.9.11" this is 11. 

If not a null pointer, then it is set to the subminor igraph version. E.g. for version "0.9.11" this is 11. 
Example 32.1. File examples/simple/igraph_version.c
#include <igraph.h> #include <string.h> int main(void) { char tmp[100]; const char *string; int major, minor, subminor; igraph_version(&string, &major, &minor, &subminor); snprintf(tmp, sizeof(tmp), "%i.%i.%i", major, minor, subminor); if (strncmp(string, tmp, strlen(tmp))) { return 1; } return 0; }
igraph_error_t igraph_running_mean(const igraph_vector_t *data, igraph_vector_t *res, igraph_integer_t binwidth);
The running mean is defined by the mean of the
previous binwidth
values.
Arguments:

The vector containing the data. 

The vector containing the result. This should be initialized before calling this function and will be resized. 

Integer giving the width of the bin for the running mean calculation. 
Returns:
Error code. 
Time complexity: O(n), n is the length of the data vector.
igraph_error_t igraph_random_sample(igraph_vector_int_t *res, igraph_integer_t l, igraph_integer_t h, igraph_integer_t length);
This function generates an increasing sequence of random integer numbers from a given interval. The algorithm is taken literally from (Vitter 1987). This method can be used for generating numbers from a very large interval. It is primarily created for randomly selecting some edges from the sometimes huge set of possible edges in a large graph.
Reference:
J. S. Vitter. An efficient algorithm for sequential random sampling. ACM Transactions on Mathematical Software, 13(1):5867, 1987. https://doi.org/10.1145/23002.23003
Arguments:

Pointer to an initialized vector. This will hold the result. It will be resized to the proper size. 

The lower limit of the generation interval (inclusive). This must be less than or equal to the upper limit, and it must be integral. 

The upper limit of the generation interval (inclusive). This must be greater than or equal to the lower limit, and it must be integral. 

The number of random integers to generate. 
Returns:
The error code 
Time complexity: according to (Vitter 1987), the expected running time is O(length).
Example 32.2. File examples/simple/igraph_random_sample.c
#include <igraph.h> int main(void) { igraph_vector_int_t V; igraph_vector_int_init(&V, 0); igraph_random_sample(&V, 0, 100, 5); igraph_vector_int_print(&V); igraph_vector_int_destroy(&V); }
igraph_error_t igraph_sample_sphere_surface(igraph_integer_t dim, igraph_integer_t n, igraph_real_t radius, igraph_bool_t positive, igraph_matrix_t *res);
The center of the sphere is at the origin.
Arguments:

The dimension of the random vectors. 

The number of vectors to sample. 

Radius of the sphere, it must be positive. 

Whether to restrict sampling to the positive orthant. 

Pointer to an initialized matrix, the result is stored here, each column will be a sampled vector. The matrix is resized, as needed. 
Returns:
Error code. 
Time complexity: O(n*dim*g), where g is the time complexity of generating a standard normal random number.
See also:

igraph_error_t igraph_sample_sphere_volume(igraph_integer_t dim, igraph_integer_t n, igraph_real_t radius, igraph_bool_t positive, igraph_matrix_t *res);
The center of the sphere is at the origin.
Arguments:

The dimension of the random vectors. 

The number of vectors to sample. 

Radius of the sphere, it must be positive. 

Whether to restrict sampling to the positive orthant. 

Pointer to an initialized matrix, the result is stored here, each column will be a sampled vector. The matrix is resized, as needed. 
Returns:
Error code. 
Time complexity: O(n*dim*g), where g is the time complexity of generating a standard normal random number.
See also:

igraph_error_t igraph_sample_dirichlet(igraph_integer_t n, const igraph_vector_t *alpha, igraph_matrix_t *res);
Arguments:

The number of vectors to sample. 

The parameters of the Dirichlet distribution. They must be positive. The length of this vector gives the dimension of the generated samples. 

Pointer to an initialized matrix, the result is stored here, one sample in each column. It will be resized, as needed. 
Returns:
Error code. 
Time complexity: O(n * dim * g), where dim is the dimension of the sample vectors, set by the length of alpha, and g is the time complexity of sampling from a Gamma distribution.
See also:

igraph_error_t igraph_convex_hull( const igraph_matrix_t *data, igraph_vector_int_t *resverts, igraph_matrix_t *rescoords );
The convex hull is determined by the Graham scan algorithm. See the following reference for details:
Thomas H. Cormen, Charles E. Leiserson, Ronald L. Rivest, and Clifford Stein. Introduction to Algorithms, Second Edition. MIT Press and McGrawHill, 2001. ISBN 0262032937. Pages 949955 of section 33.3: Finding the convex hull.
Arguments:

vector containing the coordinates. The length of the vector must be even, since it contains XY coordinate pairs. 

the vector containing the result, e.g. the vector of
vertex indices used as the corners of the convex hull. Supply


the matrix containing the coordinates of the selected
corner vertices. Supply 
Returns:
Error code:

Time complexity: O(n log(n)) where n is the number of vertices.
typedef struct igraph_plfit_result_t { igraph_bool_t continuous; igraph_real_t alpha; igraph_real_t xmin; igraph_real_t L; igraph_real_t D; const igraph_vector_t* data; } igraph_plfit_result_t;
This data structure contains the result of igraph_power_law_fit()
,
which tries to fit a powerlaw distribution to a vector of numbers. The
structure contains the following members:
Values:

Whether the fitted powerlaw distribution was continuous or discrete. 

The exponent of the fitted powerlaw distribution. 

The minimum value from which the powerlaw distribution was
fitted. In other words, only the values larger than 

The loglikelihood of the fitted parameters; in other words, the probability of observing the input vector given the parameters. 

The test statistic of a KolmogorovSmirnov test that compares the fitted distribution with the input vector. Smaller scores denote better fit. 

The pvalue of the KolmogorovSmirnov test; 

The vector containing the original input data. May not be valid any more if the caller already destroyed the vector. 
igraph_error_t igraph_power_law_fit( const igraph_vector_t* data, igraph_plfit_result_t* result, igraph_real_t xmin, igraph_bool_t force_continuous );
This function fits a powerlaw distribution to a vector containing samples from a distribution (that is assumed to follow a powerlaw of course). In a powerlaw distribution, it is generally assumed that P(X=x) is proportional to x^{alpha}, where x is a positive number and alpha is greater than 1. In many realworld cases, the powerlaw behaviour kicks in only above a threshold value xmin. The goal of this functions is to determine alpha if xmin is given, or to determine xmin and the corresponding value of alpha.
The function uses the maximum likelihood principle to determine alpha for a given xmin; in other words, the function will return the alpha value for which the probability of drawing the given sample is the highest. When xmin is not given in advance, the algorithm will attempt to find the optimal xmin value for which the pvalue of a KolmogorovSmirnov test between the fitted distribution and the original sample is the largest. The function uses the method of Clauset, Shalizi and Newman to calculate the parameters of the fitted distribution. See the following reference for details:
Aaron Clauset, Cosma R. Shalizi and Mark E.J. Newman: Powerlaw distributions in empirical data. SIAM Review 51(4):661703, 2009. https://doi.org/10.1137/070710111
Arguments:

vector containing the samples for which a powerlaw distribution
is to be fitted. Note that you have to provide the samples,
not the probability density function or the cumulative
distribution function. For example, if you wish to fit
a powerlaw to the degrees of a graph, you can use the output of


the result of the fitting algorithm. See 

the minimum value in the sample vector where the powerlaw
behaviour is expected to kick in. Samples smaller than 

assume that the samples in the 
Returns:
Error code:

Time complexity: in the continuous case, O(n log(n)) if xmin
is given.
In the discrete case, the time complexity is dominated by the complexity of
the underlying LBFGS algorithm that is used to optimize alpha. If xmin
is not given, the time complexity is multiplied by the number of unique
samples in the input vector (although it should be faster in practice).
Example 32.3. File examples/simple/igraph_power_law_fit.c
#include <igraph.h> int main(void) { igraph_t g; igraph_vector_t degree; igraph_plfit_result_t model; /* Seed random number generator to ensure reproducibility. */ igraph_rng_seed(igraph_rng_default(), 42); /* Generate a BA network; degree distribution is supposed to be a powerlaw * if the graph is large enough */ igraph_barabasi_game( &g, 10000, /*power=*/ 1, /*m=*/ 2, /* outseq= */ 0, /* outpref= */ 0, /*A=*/ 1, IGRAPH_UNDIRECTED, IGRAPH_BARABASI_BAG, /*start_from=*/ 0 ); /* Get the vertex degrees. We use igraph_strength() because it stores its * result in an igraph_vector_t */ igraph_vector_init(°ree, 0); igraph_strength(&g, °ree, igraph_vss_all(), IGRAPH_ALL, IGRAPH_NO_LOOPS, 0); /* Fit a powerlaw to the degrees */ igraph_power_law_fit( °ree, &model, /* xmin = */ 1, /* force_continuous = */ 0 ); /* If you also need a pvalue: */ /* igraph_plfit_result_calculate_p_value(&model, &p, 0.001); */ printf("alpha = %.5f\n", model.alpha); printf("xmin = %.5f\n", model.xmin); printf("loglikelihood = %.5f\n", model.L); igraph_vector_destroy(°ree); igraph_destroy(&g); return 0; }
igraph_error_t igraph_plfit_result_calculate_p_value( const igraph_plfit_result_t* model, igraph_real_t* result, igraph_real_t precision );
The pvalue is calculated by resampling the input data many times in a way
that the part below the fitted x_min
threshold is resampled from the
input data itself, while the part above the fitted x_min
threshold is
drawn from the fitted powerlaw function. A KolmogorovSmirnov test is then
performed for each resampled dataset and its test statistic is compared with the
observed test statistic from the original dataset. The fraction of resampled
datasets that have a higher test statistic is the returned pvalue.
Note that the precision of the returned pvalue depends on the number of resampling attempts. The number of resampling trials is determined by 0.25 divided by the square of the required precision. For instance, a required precision of 0.01 means that 2500 samples will be drawn.
If igraph is compiled with OpenMP support, this function will use parallel
OpenMP threads for the resampling. Each OpenMP thread gets its own instance
of a random number generator. However, since the scheduling of OpenMP threads
is outside our control, we cannot guarantee how many resampling instances the
threads are asked to execute, thus it may happen that the random number
generators are used differently between runs. If you want to obtain
reproducible results, seed igraph's master RNG appropriately, and force the
number of OpenMP threads to 1 early in your program, either by calling
omp_set_num_threads(1)
or by setting the value of the OMP_NUM_THREADS
environment variable to 1.
Arguments:

The fitted powerlaw model from the 

The calculated pvalue is returned here 

The desired precision of the pvalue. Higher values correspond to longer calculation time. @return igraph_error_t 
int igraph_cmp_epsilon(double a, double b, double eps);
Determines whether two doubleprecision floats are "almost equal" to each other with a given level of tolerance on the relative error.
The function supports infinities and NaN values. NaN values are considered not equal to any other value (even another NaN), but the ordering is arbitrary; in other words, we only guarantee that comparing a NaN with any other value will not return zero. Positive infinity is considered to be greater than any finite value with any tolerance. Negative infinity is considered to be smaller than any finite value with any tolerance. Positive infinity is considered to be equal to another positive infinity with any tolerance. Negative infinity is considered to be equal to another negative infinity with any tolerance.
Arguments:

The first float. 

The second float. 

The level of tolerance on the relative error. The relative
error is defined as 
Returns:
Zero if the two floats are nearly equal to each other within the given level of tolerance, positive number if the first float is larger, negative number if the second float is larger. 
igraph_bool_t igraph_almost_equals(double a, double b, double eps);
Determines whether two doubleprecision floats are "almost equal" to each other with a given level of tolerance on the relative error.
Arguments:

The first float. 

The second float. 

The level of tolerance on the relative error. The relative
error is defined as 
Returns:
True if the two floats are nearly equal to each other within the given level of tolerance, false otherwise. 
igraph_bool_t igraph_complex_almost_equals(igraph_complex_t a, igraph_complex_t b, igraph_real_t eps);
Determines whether two complex numbers are "almost equal" to each other with a given level of tolerance on the relative error.
Arguments:

The first complex number. 

The second complex number. 

The level of tolerance on the relative error. The relative
error is defined as 
Returns:
True if the two complex numbers are nearly equal to each other within the given level of tolerance, false otherwise. 
← Chapter 31. Advanced igraph programming  Chapter 33. Licenses for igraph and this manual → 